제품소개

수출품분야EXPORT PRODUCTS INFO.

GHI는 2017년 유망수출중소기업으로 선정되었으며, 현재 동남아지역에 건축용과 자동차, 산업용 케미칼 제품류를 수출하고 있습니다. 향후 더 많은 분야의 제품들을 수출/수입하여 국가경쟁력에 이바지하고 우수한 제품을 지속적으로 개발 및 선별하여 많은 국가에 수출토록 최선을 다하겠습니다. 현재 수출품은 아래와 같습니다.

RUST KILL CR-550

Summary
RUST KILL CR-550 is a liquid compound specially prepared to dissolve metal oxide alyer without rusting while removing rust.
It is a high-performance rust remover that is safer, more effcient and quickly removed than conventional inorganic acids (Hydrochloric acid, sulfuric acid, nitric acid).
Feature
The range of products is varied and is deoxygenated to the original color.
It removes rust, carbon, pollutants and oxides quickly.
There is little damage to the base material and it exerts the best effect even in fine grooves and cracks.
Maximum effect when used at room temperature.
It is easy to use various working methods such as dipping and spraying.
Uses
- Rust removal of car, heavy equipment, farm machinery, etc.
- Repair of spare parts, piping, storage tanks, railway cars, removal of rust
facilities.
- Rust removal of industrial machinery and parts, tools, molds, and bearings.
How to use
1. Oil or grease contaminated with the garget metal may prevent the liquid penetrating the surface. Therefore, remove it before operation.
2. It may be diluted 1~3times with the original solution depending on the degree of rusting and work speed.
3. After use, please rinse with water and rust treatment separately.
4. Do not use spray, brush or dipping.
Packing
600gr/Spray 12ea/Box, 20kg/pe Can

UNDER COAT CK-620

Feature
- lt is a high-elasticity coating meterial of rubber component which forms a strong protective flim with quick drying.
- Prevent rust and corrosion calcium chloride for snow removal on the road surface, salt in coastal roads and air pollution (dust, soot, water)
- It protects the bottom of the car sand, gravel and other pollutatns when driving.
Cautions
- Remove and discard the remaining gas after use.
- Keep out of reach of children.
- Do not spray on fire or use near fire.
- Be sure to ventilate in a closed room after use.
- Do not throw the container in the fire, do not keep it in an enclosed space.
- Spraying is poor at temperatures below 5 degrees Celsius.
- For further information, please refer to Material Safety Data Sheet (MSDS).
How to use
- Before use, life the car with the lift or fix the vehicle to the dock.
- Remove the following parts the bottom of the vehicle.
Requires underbody coatings such as underbody muffer, heat sink, fender cover and bolt / nut (maintenance required)
Do not hard coat the sub frame lower control arm, rear damper, and suspension with fluidity. Hard coating can cause cracks and corrosion.
- Undercoat the removed part.
- The full curing time is usally about 2hours, please re-coat after fully cured.
- It the content remain after use, remove the valve and button residue completely by holding the container upside down for 2~3 seconds, (If you can not spraty, remove the button and wash it with petroleum solvent)
Storage
Store in a dry area with 40℃
Packing
550ml Aerosl x 20ea/Box
  PDS

PERFECT FOAM CT-800

Feature
PERFECT FOAM CT-800 is a one-component polyurethane foam cured by air humidity.
And it has excellent foaming power and adhesion.
Cautions
- A possible temperature for using foam: above 5℃
- Coring time of a surface: 10~15min.
- A possible cutting time:40~60min.
- Hours of being completely cured: 24hours
- Volume of foaming: 30~40L
Uses
- Around a door frame and window frame
- All sorts of piping work
- Filling gaps and empty spaces
How to use
1. Remove substances (water, oil, dust) on a surface before useing.
2. Shake a can up and down before using.
3. Attach a spary straw or gun to the cnas valve.
4. Since foam expends when it is used, Spray foam about 40%, After using, wash the spray straw or gun with FoamCleaner(CC-300).
5. After using, foam hardens after more than 2 hours, and it it completely cured after 24 hours.
6. After it is completely cured, make the surface neatly using a knife, saw, etc, Next,finish the work thorugh painting and cpating.
Storage
Avoid direct sunlight, Store in a dry area with 40℃
  PDS

PERFECT SEAL CS-222

Faeture
Perfect Seal CS-222 is a neutral cure type
multi - purpose silicone
CS-222 is silicon sealant with middle modulus that has excellent adhesion to most materials.
- Acid free without disgusting odor
- Excellent weather resistance
- Excellent adhesion to various materials without requiring primer.
- Maintain elasticity at temperature of ?55~150℃
Uses
Use for : Glass Glazing
- Do not use for pai
- seal glass, composite panel, fish tank, full water immersion area
- Please ask us for other uncertain materials
How to use
1. Surface must be clean.
2. Apply back-up materials if necessary and use masking tape.
3. Use primer if necessary.
4. Cut a tip of catridge and equip nozzle with properly cut.
5. Install sealant to depth, make sure sealant is in good contact with joint surpases.
6. Remove masking tape after tooling.
Color
white, clear, gray, brown, black, wood, gold (Other colors are also available)
Storage
Avoid direct sunlight, Store in a dry area with 30℃

SILICON GUN

Silicon gun
Lightweight and convenient silicone sealant only.
Feature
- This price is cheap - Everyone is easy to use
- It is light and convenient
- product No.GP-222
- Made in Korea
   

URETHANE FOAM GUN

urethane foam gun
This gun is for urethane foam only
Feature
- It is convenient for mass use
- Everyone is easy to use
- It is convenient to use
- product No.DHP-700
- Made in Korea