PERFECT COAT CPF-909 CHEMPROOF
- Feature
- CPF - 909 is a water-soluble special synthetic acrylic rubber waterproofing agent in the cream state. After drying, it forms an elastic film with firm and beautiful color and flexibility. Also, after drying, elastic film is excellent product with superior weatherability and chemical resistance.(water, salt, sulfur, phosphorus, ultraviolet rays).
- Uses
- - Building Rooftop / Multi-purpose rooms and Balconies in APT or a single apartment house
- Toilets, bathrooms and other areas *hwere* maintenance is required
- Cautions
- - Be sure to use the undiluted solution.
- Product storage should be kept at 5℃. Please keep it inside.
- Please keep out of reach of children.
- If it gets on your skin, wash it with soap and water.
- How to use
- 1. Clean the contaminants on the installation site and check that the substrate is fully dry.
2. Apply with brush and roller (Standard application amount 0.3kg / ㎡)
3. After primer coating is completed, first application (based on 1kg / ㎡ for the first application) after at least 4hours (20℃) has elapsed.
4. Cracks larger than 0.5 mm must be filled after U/V cutting and reinforced with non-woven fabric.
5. The second application is to work in a direction that is different *form* the first (0.5kg / ㎡ of the second grade)
6. The third application is to work in a direction that is different *form* the second one (use brushes, rollers, spray (over 165 / bag)).
- Color
- Green, Gray, etc.
- Packing
- 4kg, 18kg / Pail
PERFECT COAT CPF - 908 CHEMPROOF
- Feature
- It is an inorganic elastic waterproofing agent composed of special cement and emulsion. It has strong durability and excellent elasticity and crack stability, so it can exert excellent performance in any condition and can be applied even in wet condition because it has excellent ventilation.
- It is excellent in heat resistance, weatherability, and freezing and thawing properties.
- Excellent resistance to salt and alkali
- Good adhesion to body structure
- Harmless to concrete and non-toxic.
- Uses
- - Repair and coating of rooftops, balconies, cracked areas and concrete structures
- Underground waterproofing, water treatment plant, sewage treatment plant, etc.
- Bathroom, veranda Unexposed waterproof
- Cautions
- - When diluting, water should be used less than 4%.
- The wetting condition of the construction site should be less than 40%.
- Avoid contact with water within 12 hours of application (full cure 72 hours).
- The temperature should be above 5℃ and below 35℃.
- Packing
- 18kg (Powder : 9kg / Emulsion : 9kg)
PERFECT COAT CPF-907 CHEMPROOF
- Feature
- CPF - 907 is has a rigid and flexible structure. Excellent water resistance and adhesion to objects whenforming film. It can be mixed with water-based paint and can be used as dryvit and waterproof paint on the outside wall. It has multi-purpose functions(abrasion resistance, salt resistance, weather resistance, etc.) and has 99.9% water resistance.
- Uses
- - Dryvit, Red Brick, Concrete, Bridges, Paint Waterproof, Versatile Waterproof
- When using water, based paint - CPF - 907 : Paint = 1 : 2
- Cautions
- - If you work with oil repellent agent within 3 years, do not work.
- Dry the construction site as much as possible.
- Do not touch water within 12 hours after application (full cure: 72 hours).
- Apply at temperatures between 5℃ and 35℃.
- Do not freeze when stored.
- How to use
- 1. Clean the oil, moss and dirt on the construction site thoroughly.
- Do not use cleaning agents containing acidic substances during cleaning.
- If there is water on the construction site, be sure to dry after construction.
- After the filling of the crack, the area *hwere* the crack is severe is complemented by nonwoven fabric and mesh.
2. Glass windows, automobiles, and plants around the construction site must be protected with vinyl.
3. Sealant and caulking work to reinforce the stuck parts and cracks more than 0.5mm.
4. It is used as undiluted solution and applied thinly twice with brush, roller, airless, etc.
5. Painting - Water-based paint : CPF - 907 = 1 : 0.5 ~ 1
- Color
- Clear
- Packing
- 9 Liter, 18Liter / Pail
PERFECT COAT CPF-906 CHEMPROOF
- Feature
- CPF-906 is Shingle waterproofing agent without replacing shingle repair parts with excellent elasticity and adhesion. Loop coat is a shingle waterproofing agent. This product is used for repairing parts without replacing the parts that are separated due to dust and water inflow between cracks and cracks after construction.
- Uses
- Shingle roof, tile roof, slate.
- Cautions
- - The construction site should be dried as much as possible.
- Avoid contact with water within 12 hours after application in wet condition (less than 20%)
- Apply at temperatures between 8°C and 30°C.
- Be sure to use the undiluted solution.
- Please keep it inside.
- How to use
- 1. Clean the construction site thoroughly. (Such as oil, moss, oil, debris, etc.)
- If there is any water, it must be dried before construction.
2. Perform sealing work with acrylic putty.
3. Waterproof product(undiluted solution) is applied by using brush and roller.
4. The construction should be done more than 2 times. If the condition of the bottom surface is not good, please apply polycoat (primer).
- Color
- Reddish brown, green etc.
- Packing
- 9Liter, 18Liter Pail
PERFECT COAT CPF-905 CHEMPROOF
- Feature
- CPF - 905 is a sealer waterproofing agent for acrylic emulsion synthetic polymer panel. It has sealing waterproofing ability, excellent durability against cracking, has no discoloration due to ultraviolet rays, easy to combine with general water paint, and has excellent hiding power. In addition, there is no joint to form a perfect integral coating film.
- Uses
- Sandwich panels, iron roofs and other areas that require waterproofing
- Cautions
- - Be sure to use the undiluted solution.
- Keep the product at least 5℃ and be careful about freezing.
- Keep out of reach of children.
- If it gets on your skin, wash it with soapy water.
- Do not work at temperatures below 5℃.
- Do not work if it is raining within 3~4 hours of operation.
- How to use
- 1. Remove foreign matter, dust, etc. *form* the adhered surface and clean the water. Check that the substrate is fully dried. If the construction surface is poor, apply primer (V-100) using a brush, roller or airless (spray).
2. Check the poor surface (piece and bonding area) on the surface to be repaired or reinforce using sealant (own putty seal).
3. If the primer coating is completely cured, apply this product using a brush, roller, airless (spray), etc. Second application is after the first application is fully cured. (If the thickness is increased more than 2mm at a time, the surface may be cracked)
- Color
- Blue, Reddish brown, Black, etc
- Packing
- 9kg, 18kg / Pail
PERFECT COAT CPF-904 CHEMPROOF
- Feature
- CPF - 904 is blocks the source of external damage factors such as freezing and salt, so that the building can maintain its breathability and maintain its optimum condition for a long time. It is an eco-friendly product with no odor, no fire hazard, and superior durability. It is a product that can prevent paint discoloration when applying after water paint work.
- Uses
- Exterior concrete, red brick, wooden house, ocher house, stone building, tile building, etc.
- Cautions
- - Avoid use if you have done oil-based water repellent work within 3 years.
- Please dry the construction site as much as possible.
- Avoid contact with water within 12 hours after application in wet condition.
- Please apply at 5 ℃ or more and 30 ℃ or less.
- Please keep out of reach of children and Please keep it inside.
- How to use
- 1. Clean the construction site thoroughly. (Such as oil, moss, oil, debris, etc.)
- Do not use cleaning agents containing acidic substances during cleaning.
- If there is any water, it must be dried before construction.
2. Glass windows, automobiles, and plants around the construction site must be covered with vinyl or cloth so that the water repellent does not touch the construction site.
3. If the crack area is 0.3mm or more, it must be reinforced by sealing and caulking work.
4. When using the walls coat, do not dilute with water. You must use the undiluted solution.
5. Spray and apply enough to flow down to airless, roller, brush.
- Color
- White. (Transparent after drying)
- Packing
- 4Liter, 18Liter Pail
PERFECT KILL CPF-903 CHEMPROOF
- Feature
- CPF - 903 is minimizes the temperature difference at the interface by using the air layer of ceramic and the copolymer resin of styrene acrylic. The insulation layer in the film forms a barrier film and has the effect of reflecting, refracting and dispersing the heat, and it has the effect of preventing fungi, insects and moss by excellent antibacterial property. It is a hygienic, water-soluble product with less odor and no fire hazard.
- Uses
- - APT / villa interior and basement interior
- General house - Mold caused by moisture
- The inner and outer walls of warehouse
- Insulation of building underground and roof structure
- Insulation of wooden houses and other concrete related structures
- Insulation of panel factory roof
- Cautions
- - Do not use below 5℃.
- Use less than 3% of diluent (Excessive use of thinner may cause deterioration of bad coat or insulation)
- Be sure to observe the drying time.
- Avoid eating or drinking, and keep out of reach of children.
- Please check the safety condition of the surrounding environment when constructing.
- Keep containers tightly closed and freeze after use.
- How to use
- 1. Clean the oil, moss and dirt on the construction site thoroughly.
- Do not use cleaning agents containing acidic substances during cleaning.
- If there is water on the construction site, be sure to dry after construction.
- After the V-cutting and U-cutting are performed, the cracks are repaired
using a crack filling agent.
2. Use a brush or roller to apply 2 to 3 times to avoid falling down.
3. When using airless, the nozzle diameter should be 0.019“~0.031” / injection
pressure 350 atm or more.
4. If you do not use the primer in general construction area, but if the coating
surface is not good, apply the primer using the primer and then perform
the work in th order fo 2. (CPF - 903 has maximum effect on the structure
during 3 times of painting)
- Color
- White
- Packing
- 4 Liter, 18Liter / Pail
PERFECT SEAL CPF-902 CHEMPROOF
- Feature
- It is an odorless, non-toxic, water-soluble type with excellent waterproof performance and excellent adhesion. It is easy to apply and has tensile strength and is excellent in crack resistance and resistance to salt and alkali.
- Water soluble, odorless, non-toxic product
- Excellent weatherability, durability, and fusibility
- Excellent crack, salt and alkali resistance
- Uses
- - Window frame, floor crack
- Corner Joint, Tile, Red Brick
- For maintenance reinforcement, crack filling and coating
- Cautions
- - Avoid working below 5℃
- Store in a cool room and avoid freezing.
- Do not use thinner, re-use after full curing.
- If it gets on your skin, wash it thoroughly with soap and water.
- Keep out of reach of children.
- How to use
- 1. Clean the construction site thoroughly. (Such as oil, moss, oil, debris, etc.)
2. Use a small amount in a bowl.
3. Work with masking tape.
4. Use a putty knife (rubber, silicone) to apply to the working area.
- Color
- White
- Packing
- 2kg, 4kg/pail
PERFECT PROOF CPF - 901 CHEMPROOF
- Feature
- CPF - 901 is a permeable waterproofing agent used to measure the waterproofing and physical properties of concrete. It has the property of penetrating into the micropores of concrete and reacting with calcium silicate by the copolymerization reaction of non-toxic polymer and siliceous system. It also improves waterproof, abrasion resistance, water
tightness and strength.
- Uses
- - In the bathroom, tile installation, veranda, boiler room, tile floor, concrete, crack, rooftop bottom, all parts *hwere* penetration is possible.
- Cautions
- - Do not use below 5℃ and Please be careful when freezing the product.
- Keep the remaining amount sealed after use.
- Keep out of reach of children.
- If it gets on your skin, wash it in running water within 2 hours.
- How to use
- Tile and brick is added to white cement of magemortar when it is applied,
have better waterproofing and strength.
1. Clean the oil, moss and dirt on the construction site thoroughly.
- Do not use cleaning agents containing acidic substances during cleaning.
- If there is water on the construction site, be sure to dry after construction.
- The cracked area (1mm) will repair the cracked area after construction.
- The wetness of the construction surface should be less than 30%.
2. Using th bursh roller and waterproof bursh, applly the focusing on the
joint part so that the undiluted solution is infiltrated.
3. We put a lot of work into initial construction work.
4. After thoroughly penetrating, wipe the tile surface with a towel.
5. After 1 hour of re-application, apply 2nd application and dry for 24 hours.
- Color
- Yellow White
- Packing
- 4 Liter, 16Liter / Pail
MEATL GUARD CK-656
- CK-656
- CK-656 is a rubber-based protective coating based on a quick drying rubber base.
It is an excellent coating and stripping agent developed for rubber coating and surface protection products because it has excellent adhesion to surface and peelability after curing.
It is excellent in water resistance, weather resistance, anti-rusting property, and has excellent self-adhesive strength.
It is a coating agent that protects expensive products such as household appliances, automobiles, electric / electronic, and industrial products, and then peels off when necessary.
It is an excellent rubber coating agent used in various industries.
- Feature
- - It has excellent initial adhesion and relative strength, so it can be applied to metal, plastic, concrete, stone, rubber and wood surface. Anyone can remove it quickly and conveniently.
- This coating is excellent in water resistance, weather resistance, chemical resistance and rust prevention. Leave it for a long time after application, and when removed if necessary, provides the original surface.
- Maintains its original state even at temperatures up to 30~60℃.
- The product does not cracks and has excellent weather resistance against temperature changes.
- It is convenient to use with various application methods. (Dipping, Spray, Brushing etc.)
- Excellent adhesion to porous materials.
- Uses
- - Tool, Valve color classification
- Restoring a worn object
- Weathering of fabrics and wool
- Noise reduction
- Prevent rust and corrosion
- Insulation of tool electrical connections
- It can be applied to various areas such as wood, metal, glass, plastic, canvas, rubber, fiberglass, brick
- How to use
- 1.The surface to be coated should be clean. CC-303(PERFECT CLEANER) Use to remove dust, oil and grease. stir the contents well or mix with a low speed mixer. No air bubbles should occur.
2. Coat with brush every 30~40 minutes. Allow to dry for 4hours at 21℃ for each coat.
3. When good peelability is required, it is ideal to apply about 3 times.
4. When peeling, peel it off easily by grasping the end of the product.
- Packing
- 500gr/1Gallon Steel can (Packing according to customer's request is also possible)
400㎖ 25can/Box
